.. _Stopping Virtuozzo Infrastructure Platform iSCSI Targets:

Stopping Virtuozzo Infrastructure Platform iSCSI Targets
--------------------------------------------------------

To stop a Virtuozzo Infrastructure Platform iSCSI target to which no initiators are connected, use the ``vstorage-iscsi stop`` command. For example, for the target ``iqn.2014-04.com.vstorage:test1``:

::

    # vstorage-iscsi stop -t iqn.2014-04.com.vstorage:test1

If one or more iSCSI initiators are still connected to the target, you will be informed as follows:

::

    # vstorage-iscsi stop -t iqn.2014-04.com.vstorage:test1
    initiators still connected
    Initiator:   iqn.1994-05.com.redhat:c678b9f6f0 (192.168.30.100)
    Unable stop target iqn.2014-04.com.vstorage:test1

In this case, disconnect the iSCSI initiator according to the product manual and run the ``vstorage-iscsi stop`` command again.

To forcibly stop a target to which one or more initiators are still connected, add the ``-f`` option to the command above. For example:

::

    # vstorage-iscsi stop -t iqn.2014-04.com.vstorage:test1 -f

Breaking the iSCSI connection in such a way may result in I/O errors on the iSCSI initiator's side.

